 |
Razor™
17B Automatic Scrubber with Batteries
Lays down cleaning solution, scrubs, then vacuums away dirty solution,
leaving floors clean and dry in one pass. Compact enough to clean
narrow aisles and limited-size floors. Battery-operated—no stopping
to unplug and replug every 50 feet; no cord damage or cord storage
problems; no tripping over cords during use. Wraparound handle, on-board
battery charger and click-on/click-off scrub heads. Tank cover opens
for filling. 30" squeegee. 3.7" front deck height. Both solution and
recovery tanks each hold 10.5 gallons, are noncorrosive and impact
resistant. Two-stage .68 hp vacuum motor. 170 rpm brush speed. ETL
and Warnock Hersey Approved. 20w x 47d x 43h. Shpg. wt. 247 lbs.
Item Code: ECL 56397375 |
 |
Air
Mover Efficient, high-quality air mover dries carpet and floors three
times faster. The 1/2 HP, 115v motor offers three speeds and three
angles to allow air flow in any direction. 2400 CFM. Specially designed
high-density polyethylene housing for easy, durable handling. Stacks
for convenient storage. Highly durable 10" galvanized steel fan wheel.
20-ft. power cord. Manufacturer’s 10-year warranty on the chassis.
Shpg. wt. 36 lbs.
Item Code: EAG 1150 |
 |
Sanitaire®
Commercial Three-Speed Air Mover with Built-On Dolly Dries carpet
and floors quickly. Powered by a 1/2 HP motor that provides up to
2900 CFM. Space-saving, stackable design. Easy to transport, no lifting—extend
the dolly handle (up to 39" high) and go. Easy-carry molded handle,
3-position kickstand, two 5" hard-rubber wheels and thermal shut-off.
Made of durable high-density polyethylene with reinforced motor lugs.
20-ft. power cord. Manufacturer’s one-year parts/labor warranty for
commercial use. ETL Approved. Shpg. wt. 42 lbs.
Item Code: EUR 6052 |
 |
Universal
Clutch Plate for Floor Machines Recommended for most applications.
Cast of durable zinc alloy with 5" center hole.
Item Code: BRU N92 |
 |
Short
Trim Pad Driver for Floor Machines Red, 1/2" long, poly fibers are
unevenly trimmed and widely spaced for pad holding power. Universal
clutch plate attached. Fits most machines. Manufactured on a durable
plastic block with riser.
17" Pad Diameter
Item Code: BRU PPP17 |
|
Short
Trim Pad Driver for Floor Machines Red, 1/2" long, poly fibers are
unevenly trimmed and widely spaced for pad holding power. Universal
clutch plate attached. Fits most machines. Manufactured on a durable
plastic block with riser.
18" Pad Diameter
Item Code: BRU PPP18 |
|
Short
Trim Pad Driver for Floor Machines Red, 1/2" long, poly fibers are
unevenly trimmed and widely spaced for pad holding power. Universal
clutch plate attached. Fits most machines. Manufactured on a durable
plastic block with riser.
19" Pad Diameter
Item Code: BRU PPP19 |
|
Short
Trim Pad Driver for Floor Machines Red, 1/2" long, poly fibers are
unevenly trimmed and widely spaced for pad holding power. Universal
clutch plate attached. Fits most machines. Manufactured on a durable
plastic block with riser. 20" Pad Diameter
Item Code: BRU PPP20 |
 |
Sanitaire®
Model SC6001 Compact Commercial Floor Machine Easily maintain a variety
of flooring surfaces. Built for scrubbing, stripping, polishing, carpet
cleaning and more. Built-in safety shut-off, twin capacitors, steel
planetary gear drives and heavy-duty, wrap-around furniture guards.
Steel construction. Compact and lightweight. Telescopic chrome steel
handle for easy transport and compact storage. 12" brush diameter
for use in tight spaces. Powerful 175 rpm motor. Pad driver and five
pads included. 25-ft., three-wire power cord. UL Listed. Manufacturer’s
three-year parts/one-year labor warranty for commercial use. Shpg.
wt. 60 lbs.
Item Code: EUR 6001 |
 |
Sanitaire®
Model SC6015 Commercial Floor Polisher Easily maintain a variety of
flooring surfaces. Built for scrubbing, stripping, polishing, carpet
cleaning and more. Built-in safety shut-off, twin capacitors, steel
planetary gear drives and heavy-duty, wrap-around furniture guards.
Steel construction. For stripping, scrubbing, spray buffing, polishing,
sanding and more. Chrome-plated steel housing. Exclusive quick connect
fold-down handle. Powerful 1.5 hp motor. 175 rpm. Triple planetary
gear drive. 17" brush diameter. 50-ft. three-wire power cord. UL Listed.
Manufacturer’s three-year parts/one-year labor warranty for commercial
use. Shpg. wt. 123 lbs.
Item Code: EUR 6015 |
 |
Kent
SelectLine® 20HD Multipurpose Floor Machine For polishing, stripping,
cleaning, gym floor screening, carpet bonneting and shampooing. All-steel
chrome plated bell housing resists corrosion. Rugged handle has safety
switch to prevent accidental start-up. Pressure trigger bar with automatic
shut-off. Quick release system for fast, easy changing of pads and
brushes. Foot-controlled handle lock makes adjustments easy and minimizes
operator bending and fatigue. 175 rpm. Nonmarking wheels. 1.5 hp motor.
ETL Approved. 20" brush diameter. 50-ft. power cord. Shpg. wt. 120
lbs.
Item Code: ECL 01420A |
 |
B-Line
Floor Machines Designed for professional floor care maintenance: stripping,
scrubbing, spray buffing, polishing, sanding, and grinding on hard
floor surfaces; shampooing and bonnet cleaning of carpeted floors.
Equipped with cool-running, large frame motors with steel planetary
gear boxes. Dual deadman switch system—motor stops with release of
trigger for operator protection. Nonmarking 5" solid wheel. Nonmarring
bumpers on chassis and motor canopy. Brush speed 175 rpm. Horse power
1.00. 50-ft. power cord. UL Listed. White enamel housing. 18" Brush
Spread 14" brush diameter. Shpg. wt. 97 lbs.
Item Code: PUL B16E |
 |
B-Line
Floor Machines Designed for professional floor care maintenance: stripping,
scrubbing, spray buffing, polishing, sanding, and grinding on hard
floor surfaces; shampooing and bonnet cleaning of carpeted floors.
Equipped with cool-running, large frame motors with steel planetary
gear boxes. Dual deadman switch system—motor stops with release of
trigger for operator protection. Nonmarking 5" solid wheel. Nonmarring
bumpers on chassis and motor canopy. Brush speed 175 rpm. Horse power
1.00. 50-ft. power cord. UL Listed. White enamel housing. 18" Brush
Spread 16" brush diameter. Shpg. wt. 99 lbs.
Item Code: PUL B18E |
|
B-Line
Floor Machines Designed for professional floor care maintenance: stripping,
scrubbing, spray buffing, polishing, sanding, and grinding on hard
floor surfaces; shampooing and bonnet cleaning of carpeted floors.
Equipped with cool-running, large frame motors with steel planetary
gear boxes. Dual deadman switch system—motor stops with release of
trigger for operator protection. Nonmarking 5" solid wheel. Nonmarring
bumpers on chassis and motor canopy. Brush speed 175 rpm. Horse power
1.00. 50-ft. power cord. UL Listed. White enamel housing. 20" Brush
Spread 18" brush diameter. Shpg. wt. 100 lbs.
Item Code: PUL B20E |
 |
Automatic
Scrubber/Buffer In one pass, this scrubber/buffer applies solution,
scrubs and vacuums floors dry. Thoroughly cleans and dries floor up
to 16,000 square feet per hour. Fits through checkout lanes and quickly
breaks down into four modular sections for easy transport and storage.
Convert to buffing operation by raising the squeegee blade and positioning
20" floor pad on the drive brush. The 12-gallon recovery tank has
an automatic shut-off switch to prevent overfilling, and a self-contained
disposal hose that permits draining without lifting, tipping or pouring.
10-gallon capacity. Squeegee width 27". Brush cleaning path 20". 75-ft.
power cord. 23w x 39d x 40.5h. Shpg. wt. 263 lbs. (Cannot ship UPS.)
Item Code: PUL ES2000 |
|
